Insert the SIM card and battery
Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your
SIM card vendor. This may be the service provider, network operator, or other vendor.
1. Always switch the device off, and disconnect the charger before removing the battery.
With the back of the device facing you, press and slide the back cover in the direction of the arrow.
2. If the battery is installed, lift the battery from the battery compartment in the direction of the arrow to remove it.
3. To release the SIM card holder, slide it in the direction of the arrow (1), and lift it (2). Insert the SIM card into the SIM card
slot (3). Ensure that the beveled corner of the SIM card is pointing up and the contact area on the card is facing the device.
Lower the SIM card holder (4), and slide it until it locks into place (5).
4. To insert the battery, align the contacts of the battery with the corresponding connectors on the battery compartment, insert
in the direction of the arrow, and gently click the battery into place.
5. Insert the locking catches of the back cover into the corresponding slots, and slide the cover into place.
Copyright © 2006 Nokia. All Rights Reserved.
8
Instead of a SIM card, you may also have a USIM card, which is an enhanced version of the SIM card and is supported by UMTS
(network service) mobile phones. Contact your service provider for more information and settings.